Price: ₹ 3,249.00 - ₹ 2,619.00
(as of Jan 14,2021 15:53:04 UTC – Details)


Product Description

dd

dd

dd

dd

Performance

Low shrinkage rateBright colorExcellent impact resistance and strengthExcellent toughness, weather resistance, good adhesion

SUNLU PETG 3D Printer Filament

SUNLU PETG filament has good load capacity and high tensile strength, impact resistance and is more durable than PLA. It also has no odour which allows easy printing indoors. It’s a kind of new light plastic.

It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces.

Brand: SUNLU

Net weight: 1kg

Print temp: 230-250°C / (446-550°F)

Hot bed temp: 50-80°C

Print speed: 50-100mm/s

Packaging Included: 1 × spool of PETG filaments

d

d

d

d

d

d

dd

FAQ

Why can’t the filaments stick to the hotbed easy?

1). Check the temperature setting before printing, PETG filament temperature about 230-250℃;

2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue;

3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;

dd

?Dimensional Accuracy & Consistency?—These tough PETG filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / – 0.02 mm without any exaggeration; 1 kg spool (2.2lbs)
?Clog-Free, Bubble-Free & Easy-to-use?—Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. without stringing and warping issues under optimal settings. Recommended PETG Filament Extrusion/Nozzle Temperature 240±10°C (446? – 482?), heated Bed Temp: 70°C – 80°C (158? – 176?).
?Wide Compatibility?—Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.
?Risk-Free?Spool Diameter: 8″ – Spool Width: 2.5″ – Spool Hub Hole Diameter: 2.20″

Leave a Reply

Your email address will not be published. Required fields are marked *