Product Description

PRODUCT DESCRIPTION

The Chiptronex VIPER RGB Mid tower Cabinet comes with preinstalled four 120mm ARGB fans. Three fans on front panel and one on rear and also has a controller which supports up to 10 fans(6pin) for RGB control by Motherboard Sync. It has 5mm thick edge to edge tempered glass on front and side panel which give the case a unique outlook and various options to show off your build inside. It supports 240 mm liquid radiator on front. It supports motherboard ATX/Micro -ATX/ Mini ATX. Max VGA Length is 315 mm and Max CPU Cooler Height is 160 mm.

DRIVE BAYS

The VIPER RGB will support up to two 3.5 HDD bays on the bottom of the case from backside with the help of the handy screws the Hard disk should be fixed. The hard disk should be fixed before fixing the power supply and the power supply will be fixed securely at the bottom of the case

COMPONENT CLEARANCES

The VIPER RGB can support Maximum VGA card length is 315mm and Maximum CPU cooler height is 160 mm, the case support two 2.5 SSD on side

PREINSTALLED 4 ARGB FAN WITH MOTHBOARD SYNC AND REMOTE CONTROL

The VIPER RGB comes with 4 pre installed 120mm ARGB fans. Three fans on front and one on rear which comes with RGB Controller which supports up to 10 fans and with 3 pin ARGB header to control the LEDs with motherboard software and it has a dedicated RGB Remote control which uses to control the fans and led using remote control

TEMPERED GLASS PANEL

The case comes with 4mm edge to edge tempered glass side panel which gives the case premium look

Radiator Support

The VIPER RGB can support up to 240mm Radiator on front, and 120mm on rear

Front – 120/140/240 mmRear – 120 mm

COOLING FANS SUPPORT

The VIPER RGB mid tower ATX case can support

Front: 3 x 120, 2 x 140 mmTop: 2 x 120 mmBottom on PSU Cover : 2 x 120 mmRear: 1 x 120 mm

RICH CONNECTIVITY

It has 1 x USB 3.0, 2 x USB 2.0, Audio In/Out, and Reset button

Power ButtonReset ButtonHD AudioUSB 2.0USB 2.0USB 3.0

3 PIN RGB HEADER

The Case comes with 3 pin RGB header which helps to control the RGB color mode using motherboard software. the 3 Pin RGB header will support only if there is 3 pin RGB support in the motherboard or else you cant control the ARGB fans with motherboard software. If not you can control the fans using given RGB remote controller

MAGNETIC DUST FILTERS

It has magnetic dust filters on the top it can be easily removeable and cleanable

Motherboard Type

ATX, Micro-ATX, Mini-ITX

I/O Panel

USB 3.0 x 1, USB 2.0 x 2,HD Audio, Reset

Drive Bays

2 x 3. 5 Inch HDD,2 x 2.5 Inch SSD, No ODD

Pre-Installed Fans

Front: 3 x 120mm ARGB Fans, Rear 1 x 120mm ARGB Fan

Tempered Glass Panel

Side

Fan Support

Front:3 x 120,2 x 140, Top:2 x 120, Rear 1 x 120mm and on bottom PSU Cover 2 x 120mm

RGB Controller

It supports up to 10 fans with RGB Header and Remote controller

Radiator Support

Front: 120/240,Rear: 120mm

Maximum CPU Cooler Height

160 mm

Maximum VGA Card Length

315 mm

4 x 120 mm Preinstalled ARGB fans,
Tempered glass panel on side panel
Rgb controller with motherboard sync and remote control
It supports 2 x 3.5 HDD , 2 x 2.5 SSD